Maintenance & Tightening Instructions

Maintenance Instructions

While the X1-PR0 requires minimal maintenance there are a couple of maintenance requirements to ensure precise and efficient use of the X1-PR0 and to qualify for all GMX7 warranties.

  • Each X1-PR0 Unit must be unreeled, prior to use, and reeled in after use, with care to ensure equal distribution on and off the reel.

  • Following the last weekly use, each X1-PR0 Unit must completely unscrew the tightening screw cap and release the 3 aluminum wedges from inside the shuttle, staying on the tethered line. Then submerge The X1-PRO (including reel) into a bucket of freshwater 4-5 times and/or thoroughly hose the X1-PR0 down with fresh water. Then either hang the entire unit or lay out flat to dry (drying should be less than 30 minutes)

  • Prior to the first use of the following weeks’ usage, place the 3 aluminum wedges back into the shuttle making sure grooves on each individual aluminum wedge lineup with the inside of the shuttle. Then apply “Lube Tube” (provided in each X1-PR0 package and is waterproof non-toxic {NSFH-1}, biodegradable, non-dripping, non-flammable lubricant) to either the outside of the tightening screw cap and/or inner side of the shuttle where screw cap tightens into and screw the tightening cap all the way in and all the way out, distributing the lube evenly, 8-10 times.

*This is done to ensure precise efficient usage of the “zero to immovable” and “measurable and duplicatable” features of the X1-PRO.

Tightening Instructions

Lube Tube Application


Send a Message

    Stay Connected


    * indicates required

    STEP #1

    STEP #2

    STEP #3

    STEP #4

    STEP #5

    STEP #6

    STEP #7

    STEP #8

    STEP #9

    STEP #10

    Shopping cart
    There are no products in the cart!
    Continue shopping